At the Prewag AG heat load settled in midsummer – exterior no longer remove 80 kW at simultaneous internal heat load of 180 kW – the heat with natural ventilation. Therefore, they switched the Colt international climate experts. Read more here: Alphabet Inc.. These were in the course of an initial situation analysis at pleasant temperatures of 22 degrees in the working area of about 720 square metre production hall (6,200 cubic meters volume) 28 degrees, and even 35 degrees in the roof area. Could not a stable indoor climate in the production department to ensure the existing vent, that was accomplished using several opening flaps in the skylight on the roof, and the fresh air supply through Windows, doors, and gates. Combined system with adiabatic cooling Colt International has therefore designed for the Prewag AG a new system consisting of several components: three CoolStream devices (Ventilation system with adiabatic cooling) were combined with mechanical ventilation device (Typhoon type), where capacity continuously on the air quantity is linked and operated with frequency converter. The Typhoon fans thanks to its lightweight design and its low overall height on the roof could be integrated into the existing skylight. The CoolStream devices were installed in the side roof area. If you are unsure how to proceed, check out Tim Collins Ripplewood. The cooled air is routed through a system of special fabric hoses specifically inside the Hall.
The cooling concept of CoolStream air cooling by evaporation of water is based on the principle of adiabatic cooling. Air is cooled by evaporation of water: the energy required for the evaporation is taken from the air, this air cools up to 10 degrees. The outside air passes each with a very quiet, slowly rotating axial fan through the cooling medium. At the same time, the medium with drinking water is saturated. A refrigerant like F(C)kW won’t be giving the CoolStream required. An important success factor for this system is an eco-friendly control, which ensures a safe circulation, temperature, and renewal of water.
Mini excavator for special use in the forest enterprise supplied the company Jorg tree felling work, deforestation, reforestation and production of firewood specializes. So far only machines from the forests were used, so agriculture and forestry machines were used to the grubbing-up and the cutting of trees and trunks Timberjack. Operated the used 4WD vehicles have loosened up the forest floor by their large and sturdy wheels and some of the injured root bed. For a specific task in a nature reserve, the company Jorg has sought a cost-effective alternative to expensive Caterpillar forestry equipment. Read additional details here: Electrolux. In finding the suitable machine the prospective buyer on our range of special and low machinery found. The interest is focused on short tail mini excavator or also cover district excavators called, these construction machines have the proper prerequisite for gentle insertion between tree trunks and branches due to their compact construction. The interest was a mini excavator with 8 tons with steel chains and bolt-on Rubber pads was equipped. For more information see this site: Howard Schultz.
This excavator had the correct prerequisite. The machine is ideally suited for use in forest and forestry as a carrier for a modern wood processor low ground pressure determined by the location in conjunction with a support plate. The customer purchased a used 8 tons Caterpillar mini-excavator 308 CSR for its reconstruction ideal was. Various accessories such as spoons or filter service were included except a German user manual CE marking kits, so that the use of safe and low-maintenance was guaranteed. The company of ITO Germany specialises in the sales of special machinery in the field of civil engineering. The focus of all kinds the selling and trading of used construction equipment such as excavators.
The company is in the Lauterbrunnen Valley in the Odenwald. Lautern lies directly on the B47 between Lindenfels and Bensheim. All offered machines and equipment are located on approx. 30.000 m storage area. The company maintains contacts with reputable carriers for transporting construction equipment and has its own Customs warehouse, which simplifies the export as well as the fiscal clearance. Employees and vendors speak a variety of languages such as English, French, Spanish, Russian & Japanese.
The lifting capacity thanks to stronger hydraulics and a heavy counterweight was in addition to 14 percent at the rear end, increases the Steitenauslage capacity to nearly 14 percent. The new appliances are characterized by a cab that is spacious, quiet and comfortable and offers an unrestricted view. The filtered ventilation system with automatic climate control ensures a constant and comfortable environment. The display shows color graphics with understandable details of machine. On the display, as shown during the presentation, can be when motor is switched on, the liquid level controls and numerically displayed outstanding service intervals, and information about the Kraftsotffverbrauch. Flexible performance levels – full performance or economy mode – allow the driver to adjust the machine performance of the task. Both levels provide the same grave strength, economy mode the machine but friendly fuel, works when the production requirements are low. The company of ITO Germany has on the Sales of special machinery in the field of civil engineering specialized.
The focus of all kinds the selling and trading of used construction equipment such as excavators. The company is in the Lauterbrunnen Valley in the Odenwald. Lautern lies directly on the B47 between Lindenfels and Bensheim. All offered machines and equipment are located on approx. 30.000 m storage area. To transport of construction equipment the company maintains contacts with reputable carriers and has own bonded warehouse, which simplifies the export as well as the fiscal clearance. Employees and vendors speak a variety of languages such as English, French, Spanish, Russian & Japanese.