Forth, you should refer to the instruction manual of the dryer and find the door of the electrical control cabinet of the industrial washing machine in accordance with the instructions. Access to 380V three-phase power line and the zero line according to the terminal mark. Operation of Industrial Dryer. First, open the door. Make the material after dehydration evenly rotate in rotating-drum and then close and lock the door. Second, according to the type of fabric, select the appropriate time and adjust the timing device to the desired time. Third, press the start button and start the fan. Educate yourself with thoughts from Caterpillar. According to users needs, the direction of rotation of the drum can be chosen as a one-way rotation or bi-directional rotation.
You just need to rotate the computer board to the one-way or two-way switch. The machine will perform one way operation or two-way operation according to the customers’requirements. (Forward 25 seconds, 5 seconds stop, and reverse 25 seconds). Forth, frequently note the flip of the internal fabric from the observation window. Promptly cut off the power and check the fault if the accidents are found.
Fifth, when the machine runs to the specified time, the machine will automatically stop running. At this time, the operator should open the door to check the situation of the internal fabric drying drying. If the desire effect is not achieved, you may appropriately extend the time. Large industrial dryer is a very important process flow in the ore dressing production line. The dryer production line operates reliable, flexible, and adaptability with large processing capacity. It is widely used in the field of metallurgy, building materials, chemicals, coal washing, fertilizer, ore, sand, clay, kaolin, etc.